1.[Curtain Part] Detailed Book of Rolling blinds
❤ 2. Head making installation
There are two methods for installing the head, corresponding to two installation schemes.
(2) Interior decoration
Place the finished roller shutter in the window frame. After finding a suitable position, mark the position of the head screw on the top of the window frame. Lock the left and right head screws on the top of the window frame respectively, and lift the rotatable module on the head without pull bead.
❤ 3. Installation track
First, insert the right end of the upper rail into the head with tab, and then insert the left end of the upper rail into the head without tab. Buckle the opened rotatable module and confirm that the roller shutter will not fall or move easily, then the installation is completed. Pull down the bead curtain on the front side slightly, and the roller curtain will rise automatically. Pull down the bead curtain on the back side to control the lowering of the roller curtain.
❤ 4. Positioning
The accuracy of line drawing and positioning is related to the success or failure of curtain installation. First, measure the fixed hole spacing and the size of the required installation track.
❤ 5. Install curtain rail
(1) Curtain rails can be divided into single, double or three tracks. When the window width is greater than 1200mm, the curtain rail shall be disconnected, and the bending at the disconnection shall be staggered. The bending shall be gentle and the overlapping length shall not be less than 200mm. The open curtain box is generally installed with rails first. Machine screws shall be added to heavy curtain rails; The concealed curtain box shall be installed with rear track. The space between small corners of heavy curtain rail shall be increased, and the specification of wood screws shall not be less than 30mm.
(2) Install the lifting clip, rotate the clip 90 degrees to connect with the rail, and install the lifting clip onto the top plate with self tapping screws. In case of concrete structure, expansion screws shall be added.
❤ 6. Install curtain rod
(1) Correct the connecting fixing parts, install the rod or iron wire and pull it on the fixing parts. The level and elevation of the room shall be consistent.
(2) When installing standard curtain rails (double rails), their foundation width should generally be more than 15CM, and monorails can be reduced as appropriate.
❤ 7. Adjustment position
For floor type curtains or curtains hanging over the table top, the width of the windowsill shall be allowed when installing the track to avoid blocking when the curtains droop.
IV Cleaning of rolling curtain
❤ 1. The rolling curtain is not as convenient to clean as the ordinary cloth curtain. It can be cleaned in the washing machine at will. It is a finished rolling curtain customized by a specially assigned person and is very resistant to disassembly. It is better not to operate it at will if you are not a professional. When cleaning without disassembly, you can first clean the dust on the surface, open the fabric, clean it with a sponge soaked in neutral detergent, brush it once with a soft brush, rinse it with clean water, and then dry it in the air. In order to keep the rolling curtain clean for a long time, you can spray some polish properly.
❤ 2. Dismantle and clean, first put the roller shutter into the shaft, then open the small dismantling bayonet on the left side of the upper beam, remove the upper and lower beams of the roller shutter, spread them flat on the ground, pour water containing detergent, soak them for a few minutes, wash them with a brush, and finally rinse them with clean water, remember not to fold them. This method is suitable for ordinary roller blinds.
❤ 3. The spring rolling curtain and electric rolling curtain need to be cleaned by professionals with certain technology to avoid damaging the spring, motor and other parts. It is recommended not to clean them by yourself.
V Maintenance method of rolling curtain
❤ 1. Rolling curtains will accumulate a lot of dust if they are not used for a long time, which will seriously affect the beauty of the curtains, so pay more attention to cleaning the surface of the curtains.
❤ 2. The curtain should be checked regularly. First, check the smoothness of the rolling curtain, whether the guide rail used to keep the curtain running needs to be cleaned, or whether there are foreign matters stuck in it. At the same time, a considerable amount of dust or other foreign matters will accumulate in the guide rail or on the panel of the rolling curtain over a long period of time, which will easily lead to the rolling curtain not working properly, Therefore, it is correct to use a wet rag to clean it regularly.
Conclusion: Have you solved the problems mentioned above? Curtain is a kind of furniture that has been used for a long time. If its service life can reach our expectation or even longer, it is necessary to clean and maintain it frequently.